EN 1090-2 Standardında Adı Geçen Bağlantı Elemanları İle İlgili Standartlar Nelerdir?
EN 14399-1, High-strength structural bolting assemblies for preloading — Part 1: General requirements
EN 14399-2, High-strength structural bolting assemblies for preloading — Part 2: Suitability test for preloading
EN 14399-3, High-strength structural bolting assemblies for preloading — Part 3: System HR — Hexagon bolt and nut assemblies
EN 14399-4:2005, High-strength structural bolting assemblies for preloading — Part 4: System HV — Hexagon bolt and nut assemblies
EN 14399-5, High-strength structural bolting assemblies for preloading — Part 5: Plain washers
EN 14399-6, High-strength structural bolting assemblies for preloading — Part 6: Plain chamfered washers
EN 14399-7, High-strength structural bolting assemblies for preloading — Part 7: System HR — Countersunk head bolts and nut assemblies
EN 14399-8, High-strength structural bolting assemblies for preloading — Part 8: System HV — Hexagon fit bolt and nut assemblies
EN 14399-9, High-strength structural bolting assemblies for preloading — Part 9: System HR or HV — Bolt and nut assemblies with direct tension indicators
EN 14399-10, High-strength structural bolting assemblies for preloading — Part 10: System HRC — Bolt and nut assemblies with calibrated preload
EN 15048-1, Non preloaded structural bolting assemblies — Part 1: General requirements
EN 20898-2, Mechanical properties of fasteners — Part 2: Nuts with specified proof load values — Coarse thread (ISO 898-2:1992)
EN ISO 898-1, Mechanical properties of fasteners made of carbon steel and alloy steel — Part 1: Bolts, screws and studs with specified property classes — Coarse thread and fine pitch thread (ISO 898-1:2009)
EN ISO 1479, Hexagon head tapping screws (ISO 1479:1983)
EN ISO 1481, Slotted pan head tapping screws (ISO 1481:1983)
EN ISO 3506-1, Mechanical properties of corrosion-resistant stainless-steel fasteners — Part 1: Bolts, screws and studs (ISO 3506-1:2009)
EN ISO 3506-2, Mechanical properties of corrosion-resistant stainless-steel fasteners — Part 2: Nuts
(ISO 3506-2:2009)
EN ISO 4042, Fasteners — Electroplated coatings (ISO 4042:1999)
EN ISO 6789, Assembly tools for screws and nuts — Hand torque tools — Requirements and test methods for design conformance testing, quality conformance testing and recalibration procedure (ISO 6789:2003)
EN ISO 7049, Cross recessed pan head tapping screws (ISO 7049:1983)
EN ISO 7089, Plain washers — Normal series — Product grade A (ISO 7089:2000)
EN ISO 7090, Plain washers, chamfered — Normal series — Product grade A (ISO 7090:2000)
EN ISO 7091, Plain washers — Normal series — Product grade C (ISO 7091:2000)
EN ISO 7092, Plain washers — Small series — Product grade A (ISO 7092:2000)
EN ISO 7093-1, Plain washers — Large series — Part 1: Product grade A (ISO 7093-1:2000)
EN ISO 7093-2, Plain washers — Large series — Part 2: Product grade C (ISO 7093-2:2000)
EN ISO 7094, Plain washers — Extra large series — Product grade C (ISO 7094:2000) (Corrigendum
AC:2002 incorporated)
EN ISO 10684, Fasteners — Hot dip galvanized coatings (ISO 10684:2004)
EN ISO 15480, Hexagon washer head drilling screws with tapping screw thread (ISO 15480:1999)
EN ISO 15976, Closed end blind rivets with break pull mandrel and protruding head — St/St
(ISO 15976:2002)
EN ISO 15979, Open end blind rivets with break pull mandrel and protruding head — St/St
(ISO 15979:2002)
EN ISO 15980, Open end blind rivets with break pull mandrel and countersunk head — St/St
(ISO 15980:2002)
EN ISO 15983, Open end blind rivets with break pull mandrel and protruding head — A2/A2 (ISO 15983:2002)
EN ISO 15984, Open end blind rivets with break pull mandrel and countersunk head — A2/A2 (ISO 15984:2002)
ISO 10509, Hexagon flange head tapping screws